adding GLaDOS disko config

configuration.nix

@@ -0,0 +1,121 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+
+{ config, lib, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+
+  # Use the systemd-boot EFI boot loader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  # networking.hostName = "nixos"; # Define your hostname.
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+
+  # Set your time zone.
+  # time.timeZone = "Europe/Amsterdam";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  # i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  services.xserver.enable = true;
+
+
+  # Enable the Plasma 5 Desktop Environment.
+  services.xserver.displayManager.sddm.enable = true;
+  services.xserver.desktopManager.plasma5.enable = true;
+  
+
+  # Configure keymap in X11
+  # services.xserver.xkb.layout = "us";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # sound.enable = true;
+  # hardware.pulseaudio.enable = true;
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  # users.users.alice = {
+  #   isNormalUser = true;
+  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+  #   packages = with pkgs; [
+  #     firefox
+  #     tree
+  #   ];
+  # };
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  # environment.systemPackages = with pkgs; [
+  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #   wget
+  # ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  # services.openssh.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "24.05"; # Did you read the comment?
+
+}
+

disko/GLaDOS/default.nix

@@ -0,0 +1,71 @@
+{
+  disko.devices = {
+    disk = {
+      sda1 = {
+        type = "disk";
+        device = "/dev/disk/by-path/pci-0000:06:00.0-ata-6";
+        content = {
+          type = "gpt";
+          partitions = {
+            ESP = {
+              size = "512M";
+              type = "EF00";
+              content = {
+                type = "filesystem";
+                format = "vfat";
+                mountpoint = "/boot";
+                mountOptions = [
+                  "defaults"
+                ];
+              };
+            };
+            luks = {
+              size = "100%";
+              content = {
+                type = "luks";
+                name = "crypted";
+                extraOpenArgs = [];
+                settings = {
+                  # if you want to use the key for interactive login be sure there is no trailing newline
+                  # for example use `echo -n "password" > /tmp/secret.key`
+                  #keyFile = "/tmp/secret.key";
+                  allowDiscards = true;
+                };
+                #additionalKeyFiles = ["/tmp/additionalSecret.key"];
+                content = {
+                  type = "lvm_pv";
+                  vg = "pool";
+                };
+              };
+            };
+          };
+        };
+      };
+    };
+    lvm_vg = {
+      pool = {
+        type = "lvm_vg";
+        lvs = {
+          swap = {
+            size = "16G";
+            content = {
+              type = "swap";
+              resumeDevice = true; # resume from hiberation from this device
+            };
+          };
+          root = {
+            size = "100%FREE";
+            content = {
+              type = "filesystem";
+              format = "bcachefs";
+              mountpoint = "/";
+              mountOptions = [
+                "defaults"
+              ];
+            };
+          };
+        };
+      };
+    };
+  };
+}

hardware-configuration.nix

@@ -0,0 +1,39 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
+  boot.initrd.kernelModules = [ "dm-snapshot" ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "UUID=166dc8d8-b77f-43fe-8bee-a0fc5b26aeb5";
+      fsType = "bcachefs";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/743A-083A";
+      fsType = "vfat";
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/3d300fda-35d4-4bdb-ac89-21b0f29b167c"; }
+    ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp3s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

nixos/hosts/GLaDOS/configuration.nix

@@ -24,11 +24,25 @@
 
     ../../desktop
 
+    ../../../disko/GLaDOS
+
     # Import your generated (nixos-generate-config) hardware configuration
     ./hardware-configuration.nix
   ];
 
   boot.loader.systemd-boot.enable = true;
+
+  # Lanzaboote currently replaces the systemd-boot module.
+  # This setting is usually set to true in configuration.nix
+  # generated at installation time. So we force it to false
+  # for now.
+  # boot.loader.systemd-boot.enable = lib.mkForce false;
+
+  # boot.lanzaboote = {
+  #   enable = true;
+  #   pkiBundle = "/etc/secureboot";
+  # };
+
   boot.loader.systemd-boot.configurationLimit = 3;
   boot.loader.efi.canTouchEfiVariables = true;
   boot.supportedFilesystems = ["bcachefs"];

nixos/hosts/GLaDOS/hardware-configuration.nix

@@ -8,24 +8,24 @@
     [ (modulesPath + "/installer/scan/not-detected.nix")
     ];
 
-  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usb_storage" "usbhid" "sd_mod" ];
-  boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ "kvm-amd" ];
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
+  boot.initrd.kernelModules = [ "dm-snapshot" ];
+  boot.kernelModules = [ ];
   boot.extraModulePackages = [ ];
 
-  fileSystems."/" =
-    { device = "/dev/disk/by-uuid/14883cd2-72b8-4ab3-8cbf-d5dca40e036a";
-      fsType = "ext4";
-    };
-
-  fileSystems."/boot" =
-    { device = "/dev/disk/by-uuid/BA43-C24E";
-      fsType = "vfat";
-    };
-
-  swapDevices =
-    [ { device = "/dev/disk/by-uuid/cffe625e-1dac-45bd-a744-303baa09affd"; }
-    ];
+#   fileSystems."/" =
+#     { device = "UUID=166dc8d8-b77f-43fe-8bee-a0fc5b26aeb5";
+#       fsType = "bcachefs";
+#     };
+#
+#   fileSystems."/boot" =
+#     { device = "/dev/disk/by-uuid/743A-083A";
+#       fsType = "vfat";
+#     };
+#
+#   swapDevices =
+#     [ { device = "/dev/disk/by-uuid/3d300fda-35d4-4bdb-ac89-21b0f29b167c"; }
+#     ];
 
   # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
   # (the default) this is the recommended approach. When using systemd-networkd it's
@@ -33,7 +33,6 @@
   # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
   # networking.interfaces.enp3s0.useDHCP = lib.mkDefault true;
-  # networking.interfaces.wlan0.useDHCP = lib.mkDefault true;
 
   nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
   hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;